The Whites HAZMAT Commercial Drysuit in Red and Black is a made-to-measure professional diving drysuit designed for commercial divers performing contaminated-water diving operations. Its attached helmet yoke supports use with compatible commercial diving helmets while the durable construction provides protection for demanding underwater work.

The suit uses chemical- and abrasion-resistant multi-laminate polyurethane with two layers of water and chemical protection surrounding a tear- and puncture-resistant nylon core. Interior and exterior seams are stitched and heat sealed at high temperature to create a durable, smooth surface that is easier to clean and decontaminate.

A heavy-duty, non-corrosive brass dry zipper provides the primary waterproof closure. The knees and shins are heavily reinforced with polyurethane for added abrasion resistance in high-wear areas.

Attached heavy-duty boots include steel toes and steel shanks for protection and support during commercial diving operations. The attached helmet yoke can be configured for compatible Kirby Morgan, Gorski G3000SS, Miller or Desco air-hat systems.

The SI TECH modular sealing system includes a Quick Neck system inside the yoke with a field-replaceable Polytex bellows neck seal. Permanently attached Quick Cuff wrist rings use replaceable Polytex Pro wrist seals, allowing damaged seals to be changed without permanently gluing replacements directly to the suit.

A SI TECH exhaust valve with a secondary check valve and a standard swivel inflation valve with a SEATEC fitting are included. The suit also includes internal suspenders, a SEATEC inflator hose, HAZMAT patch kit and drysuit storage bag.

Available options include an inflation valve with lockout, silicone seals, a convenience zipper, a CEJN valve-and-hose system and several commercial helmet-yoke configurations. The suit can be produced in red/black or all-black.

The HAZMAT Commercial Drysuit is certified to EN 14225-2:2017 Diving Suits—Dry Suits and is designed and fabricated in Canada. Because this is the MTM configuration, complete measurements and the intended helmet system must be confirmed before production.